2010 Mercedes-Benz CLS-Class Oil Change: Specs & Service

Mercedes-Benz of Draper performs the core service steps for this rear-wheel-drive V8 sedan in Draper, UT. The visit is designed to replace oil that has lost some of its ability to carry heat and debris. Booking also creates a maintenance record for the vehicle.

• Drain and refill with the manufacturer-specified oil grade and capacity
• Install a new oil filter
• Reset the oil-life monitor and check underhood fluid levels

Engine oil gradually loses its additive package even when it does not look dirty. Mercedes-Benz of Draper can service the V8 engine and log the visit in Draper, UT. Mileage and time, rather than appearance alone, are used to determine when service is due.

• Oil appearance alone does not determine service condition
• Oil supports heat transfer inside the engine
• Oil helps carry debris away from working engine components

These signs can appear in the 2010 Mercedes-Benz CLS-Class before the oil looks severely contaminated. Mercedes-Benz of Draper can review the vehicle and complete the oil and filter service in Draper, UT. A ticking or louder engine note at start-up should receive prompt attention.

• Oil-change reminder light or mileage past the last service
• Dark or low oil on the dipstick
• Ticking or louder engine sound during start-up

The service visit includes replacement of the engine oil and filter, an oil-life monitor reset, and an underhood fluid-level check. Mercedes-Benz of Draper is located at 11548 Lone Peak Parkway. Use the service scheduler to request an appointment.

• Choose the service appointment that fits your schedule
• Bring the vehicle to 11548 Lone Peak Parkway
• Have the oil and filter replacement logged to the vehicle history

Output ranges from 382 to 507 horsepower, while torque ranges from 391 to 465 lb-ft across the trims. The sedan uses rear-wheel drive, premium unleaded fuel, an automatic transmission, and seven transmission speeds. Mercedes-Benz of Draper services this powertrain in Draper, UT.

• V8 engine layout
• 5.5- to 6.2-liter engine-size range
• Rear-wheel drive with a seven-speed automatic transmission

The sedan’s torque range is 391 to 465 lb-ft, with peak power reached from 6,000 to 6,800 rpm and peak torque from 2,800 to 5,200 rpm. These specifications describe the model range rather than one individual trim. Oil service helps maintain the V8’s required lubrication system.

• 382 to 507 horsepower
• 391 to 465 lb-ft of torque
• Peak power from 6,000 to 6,800 rpm

The model is a sedan with a V8 engine and automatic transmission. Its seven-speed transmission supports the rear-wheel-drive layout. Mercedes-Benz of Draper can handle oil service for this powertrain at its Draper, UT, location.

• Premium unleaded fuel required
• Rear-wheel-drive drivetrain
• Automatic transmission with seven speeds

This service is intended for the 2010 Mercedes-Benz CLS-Class and includes an oil-life monitor reset plus an underhood fluid-level check. Keeping the service documented can make future maintenance easier to follow. Schedule with Mercedes-Benz of Draper in Draper, UT.

• Replace engine oil with the specified grade and capacity
• Install a new oil filter
• Log the completed visit in the vehicle’s history

Drivers may notice an oil-change reminder, mileage past the previous service, dark or low dipstick oil, or a ticking or louder engine note at start-up. The visit includes draining and refilling the oil, installing a new filter, resetting the oil-life monitor, and checking underhood fluid levels. For directions or appointment assistance, visit the service scheduler or contact Mercedes-Benz of Draper at 385-425-5461.

Oil loses performance as its additive package degrades, even if the fluid does not look dirty. That is why following the vehicle’s mileage- and time-based maintenance plan matters. Booking the service gets the oil and filter replaced and the visit logged against the vehicle’s history. To arrange the visit, schedule service with Mercedes-Benz of Draper or call 385-425-5461.

Mercedes-Benz of Draper’s oil service focuses on the essential maintenance steps: drain and refill with the manufacturer-specified oil grade and capacity, replace the oil filter, reset the oil-life monitor, and check underhood fluid levels. An oil-change reminder, low or dark dipstick oil, or a louder start-up engine note can indicate that an inspection is appropriate. Schedule service in Draper, UT, for your CLS-Class.